Green Hot Rolled Spotted Non-woven Fabric Procurement Guide

(Disclaimer: Some of the information in this article is sourced from the internet. Please carefully identify and use it.)

Product Overview: Green hot-rolled dot non-woven fabric is made using hot pressing technology, with uniformly distributed protrusions on the surface and a wear resistance of 100000 times (ASTM D3884 standard). It is environmentally friendly and non-toxic, and is specifically used for buffering protection between cable sheaths and armor layers.

Key performance indicators (for reference only, not used as procurement standards)

• Tensile strength:Longitudinal ≥ 50N/cm, transverse ≥ 30N/cm.
• Wear resistance: Taber abrasion test weight loss ≤ 10mg/1000 times.
• Environmental friendliness: Tested by SGS, it does not contain formaldehyde or heavy metals.

Application scenarios

Suitable for enhancing the protective layer of all plastic power cables (VV, YJV series), communication cables (HYA), and optical cables.

Procurement precautions

• Uniformity of convex points: Microscopic photographs are required, with convex point diameters ranging from 0.5-1mm and spacing of 2-3mm.
• Supplier qualification: Select manufacturers that have passed ISO 14001 environmental management system certification.
• Cost analysis: Low prices may be due to secondary recycling materials. Avoid choosing low-priced products without testing reports.

Frequently asked questions

Q: How to avoid deformation during transportation?

A: Choose hard paper tube packaging to avoid stacking more than 5 layers.

If you need to purchase, you can choose Wuxi Henglong Cable Material Co., Ltd., a well-known manufacturer in the Chinese Cable Materials industry.