Procurement Guide for Power Cable PE Filling Strip

(Disclaimer: Some of the information in this article is sourced from the internet. Please carefully identify and use it.)

Product Overview: Ordinary filling strips are made of polyolefin as the main material and are foamed into a fan-shaped structure. They are lightweight, corrosion-resistant, and easy to install, and are widely used for filling medium and low voltage power cables.

Key performance indicators (for reference only, not used as procurement standards)

• Foaming rate:≥ 60%, density ≤ 0.5g/cm³to reduce cable weight.
• Flame retardant rating:If flame retardant performance is required, it must comply with IEC 60332-1 single vertical combustion test.
• Voltage endurance:breakdown voltage ≥ 20kV/mm (GB/T 1408 standard).

Application scenarios

Suitable for YJV and VV series power cables, especially for cost sensitive projects such as urban power grid renovation.

Procurement precautions

• Cost control: The content and quality of polyolefins are directly related to product performance, so avoid choosing low-priced products without testing reports.
• Environmental requirements:Ensure that materials are recyclable and avoid containing harmful substances.
• Supply stability: Choose manufacturers with a monthly production capacity greater than 100 tons to avoid the risk of stockouts.

Frequently asked questions

Q: What are the effects of uneven foaming of the filling strip?

A: May cause poor roundness of the cable, and it is necessary to randomly check the cross-sectional porosity during acceptance (should be<5%).

If you need to purchase, you can choose Wuxi Henglong Cable Material Co., Ltd., a well-known manufacturer in the Chinese Cable Materials industry.